Product Overview:

Tire inner paints IP618Z is a new type of water-based tire inner spraying agent composed of water-based silicone emulsion and ultrafine bead mica powder, which does not contain organic solvent. During the vulcanization process, it is applied to the inner surface of the tire embryo, so that there is a good lubrication and release effect between the embryo and the bladder, and it also has the function of improving the exhaust function during the vulcanization process of the embryo, thereby effectively preventing the lack of rubber in the tire. The phenomenon.

Product physical properties:

Composition: ultrafine pearlescent mica powder, water-based silicone emulsion

Solid content: ≥ 25%

Viscosity: 2500-9000cps (rotational viscometer, 3# rotor, 6rpm)

Product Features:

1. to prevent the bladder and tire adhesion, improve the qualified rate of finished products;

2. extend the life of the bladder;

3. In the early stage of vulcanization, the bladder is easy to stretch, which is conducive to the dynamic balance control of the finished tire;

4. After the tire is vulcanized, the inner surface liquid is cured in the tire. For tires with inner tubes, the friction between the inner and outer tires can be reduced during use, and the inner tube can be protected to a certain extent.

Method of use:
There are three application methods of spraying Tire inner paints IP618Z : manual brushing, spray gun spraying and automatic spraying machine spraying. Automatic spraying machine spraying can achieve the best effect and the lowest consumption. It is recommended that the gun hole diameter is 1.0mm and the working pressure is 0.4Mpa. Stir evenly before use, and cover the lid tightly during use to prevent dust and dust and moisture volatilization.
Product Safety:
IP-618Z is not a dangerous goods, do not contain dangerous substances, the relevant safety can refer to the safety data sheet.
Packaging storage:
50KG plastic barrel. It can be stored in a dry and cool place for 6 months from the date of production, and the storage temperature should not be higher than 30 ℃. The sealing of the storage container should be ensured during use to prevent evaporation and pollution.